When it comes to replacing old windows, many homeowners worry that a lot of dirt will accumulate in them and the rooms in question will not be usable for a long time. However, this is a mistake. Below we describe how to window replacement deltona fl  and what inconveniences or limitations you can expect during the job.

When should you decide to replace your windows?

First of all, every homeowner should think about when it is worth window replacement deltona fl. However, this question can be answered very simply. If the window frames and sashes no longer look as beautiful, it means that they are ugly for the whole façade. Nobody wants that because the façade is responsible for the appearance of the property.

The second reason for window replacement deltona fl is that it is no longer airtight. Especially with very old windows it often happens that they are no longer airtight due to material deterioration or wear and tear. Then the flat becomes a bit uncomfortable. Leaks also increase energy consumption.

If a window is several years old, it is always worth replacing it. Modern windows are fitted with insulating glass units. They insulate many times better than old windows with traditional double-glazed windows.

Preparations for window replacement deltona fl

When a homeowner decides to replace one or more windows, they must find a reliable window installer. There are many companies that specialise in window installation. But carpenters, who deal with construction details, also make and install windows.

Once a suitable company has been found, an appointment is made. The contractor or one of his employees then comes to the customer’s home and inspects the old window. He takes measurements and discusses with the homeowner what kind of window he would like to install. The following materials are available:

wood

plastic

aluminium

wood-aluminium combination.

The specialist will then explain to the customer the advantages and disadvantages of the different materials. The customer is then also asked about the type of glazing. In addition to traditional double glazing, triple glazing is also available. It all depends on the thermal and acoustic insulation requirements.

After everything is explained, the craftsman presents a proposal to the homeowner. This lists all the work and materials so that the client knows what they should expect to pay. Only after this the landlord decides whether the work will be done or not. If the craftsman gets the “green light” from the customer, he proceeds to fabricate the windows or orders them. As soon as the window or windows are manufactured, the actual replacement begins.

Removal of old windows

Before installing the new windows, the craftsman dismantles the old windows. In order to minimise dirt in the flat, he first unfolds the fleece. This allows him to enter the flat without dirtying the floor. So he puts the fleece wherever he needs to move.

The next step is to remove the window sash. With older windows, he has to remove the hardware. With newer windows it works much faster. There are locking pins on the hinges which are simply pushed out with a screwdriver. The window sash can then be removed easily. He immediately transfers the removed sash to his truck for delivery. This way he does not get in the way and avoids the risk of an accident.

The next step is to dismantle the window frame. This job is a bit more complicated. Old window frames are usually fixed in the brickwork with metal anchors. It is impossible to remove them without damaging the masonry. Therefore, they are cut out. To do this, the craftsman uses a so-called wall cutter. This device is fitted with a saw that can be used to cut wood, metal and concrete. With the wall mill the craftsman cuts directly between the window frame and the wall. This allows him to separate the window frame cleanly without damaging the wall. The tiled wall is also not damaged because the tiles can be cut cleanly with the wall milling machine if necessary.

 

Wherever sawing takes place, there is always a lot of dust generated. This is especially true for masonry or concrete. A modern wall saw is therefore also equipped with a dust extraction device. This sucks up the saw dust and collects it in a larger container. It is not possible to completely avoid dirt in this way, but most of it is sucked up and thus does not get into the flat.

New window frames are usually fixed with special dowels. These can easily be removed again with a screwdriver or a cordless screwdriver to disassemble the window frame quickly and cleanly.

By Adam

Leave a Reply

Your email address will not be published.